Olympus Motor Drive 2 manual Care and Storage

Page 30

Care and Storage

Questions and Answers

Q: I have pressed the camera's shutter release.

A: If you then press the shutter release button of the Motor Drive in the single mode, only the film advance will be activated. If you press it in the sequence mode, continuous shooting in- cluding film advance is possible.

Q: I have operated the camera's shutter release and film advance lever.

A: You can do these operations on the camera even when the Motor Drive is attached. The exposure counter will also operate normally.

Q: There are no batteries inside the Motor Drive. What can I do?

A: The Motor Drive will operate if the power unit is connected, but the LCD counter cannot be used.

Q: I want to use the Motor Drive in low tempera- tures.

A: In low temperatures, it may not operate pro- perly because the battery performance will be reduced. Try to keep its power section warm by using the Relay Cord, for example.

Q: When rewinding the film, the motor does not stop even after a certain time.

A: It is because the film is not engaged with the rewind mechanism. Turn the rewind lever of the Motor Drive as far as it will go. (The film

29

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Page Page Symbols used in this manual Correct Incorrect Operation Preparation Inserting the Batteries Remove the motor drive socket cap Page Page Page Operating the Motor Drive 2 with the OIM-4 Loading the Film Press the shutter release Rewinding the Film Remove the film Page Loading the Film Press the shutter release Rewinding the Film Page Operating the Motor Drive 2 with the OM-2N OM-1N Loading the Film Make two blind shots Set the exposure counter to Rewinding the Film Rewind until the tension is released Push the reset button Page How to prevent automatic stop How to illuminate the exposure counter Attaching the strap Care and Storage Description of Controls Page Olympus Corporation
Top Page Image Contents