Oregon Scientific ATC3K manual Using the camera in cold weather, Precaution

Precaution:

Follow the steps below to keep the camera waterproof.

Step 1: Apply silicon grease (included).

Take out the o-rings and use your fingers to gently rub on a thin layer of silicon grease onto the surface of the o-rings. The silicon grease needs to be applied on the o-rings evenly.

Step 2: Ensure both o-rings are attached.

Both o-rings need silicon grease applied to them. Follow the instructions in Step 1.

Step 3: Replace the cover.

Make sure the cover is firmly closed.

Liquid may get inside the camera if the battery cover is not firmly closed

•If the camera gets wet, wipe the liquid off as soon as possible with a dry cloth.

•Other camera accessories may not be waterproof.

•Ensure the o-rings are clean and have silicon grease applied before use underwater or in wet conditions.

Using the camera in cold weather

• We recommend using Energizer e2 lithium batteries in cold weather.

Don't use the camera in extreme temperatures as this may cause the camera to malfunction.

Attention:

•Non-rechargeable batteries are not to be recharged;

•Rechargeable batteries are to be removed from the camera before being charged;

•Rechargeable batteries are only to be charged under adult supervision;

•The supply terminals are not to be short-circuited;

•Exhausted batteries are to be removed from the camera.

3 4