Getting to Know the XTC-300
Battery
1.To insert the battery, push down the battery door latch on the back of the camera.
2.Pull battery door backwards to open.
3.Install
4.Return battery door and click into place.
Battery Status | Meaning | |
Indicator | ||
| ||
Solid Green | Indicates full battery life | |
Blinking Green | Battery is charging | |
Solid Orange | Medium battery life | |
Solid Red | Indicates low battery life | |
Blinking Red* | Too low to operate | |
No Light | Batteries are depleted. |
*Note: When the red battery LED begins blinking, be prepared to charge the battery because the camera will stop recording at this point.
Micro SD Card
1.Lift latch on back to open the door
2.Insert Micro SD card into slot observing proper direction (shown below).
3.Close door until it clicks shut
Getting to Know the
Recording
1.Move the RECORD switch forward. This turns the camera on.
2.The battery indicator will light from red to green. The SD card indicator will illuminate. The camera is capturing audio and video when the REC indicator is flashing.
3.To stop recording, move the RECORD switch back to the off position.
SD card LED | Meaning | |
Status | ||
| ||
Green | 75% more available. | |
Orange | 34% - 75% available. | |
| Less than 34% | |
Red | or no Micro SD | |
| card installed. | |
Flashing Red | Cannot read the card. | |
Flashing Green | Indicates card is being | |
reformatted. | ||
|
Memory Size | 1080p Record | 720p Record | 480p Record |
| Time | Time | Time |
512 MB | 7.5 Minutes | 6.5 Minutes | 10 Minutes |
1 GB | 15 Minutes | 13 Minutes | 20 Minutes |
2 GB | 30 Minutes | 26 Minutes | 40 Minutes |
4 GB | 60 Minutes | 52 Minutes | 80 Minutes |
8 GB | 120 Minutes | 104 Minutes | 160 Minutes |
16 GB | 240 Minutes | 208 Minutes | 360 Minutes |
32 GB | 480 Minutes | 416 Minutes | 720 Minutes |
Note:
1.The camera automatically splits the video into 2 GB segments.
2.HD video requires class 4 micro SD card to record and playback
English François Español
www.midxtc.com | 3 |