Nikon D2H manual Custom Setting b2 ISO Step Value, 183, Bank Select, CH Mode

Highlight b1 ISO auto in the second level of the CSM menu ( 171) and press the multi selector to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection.

Option Description

Off Sensitivity remains fixed at value selected by user, regardless of whether (default) optimal exposure can be achieved at current exposure settings.

When optimal exposure can not be achieved at sensitivity selected by user, sensitivity is adjusted to compensate, to minimum approximately equiv- On alent to ISO 200 and maximum approximately equivalent to ISO 1600.

Sensitivity can not be set to HI-1or HI-2while this option is in effect.

Menu Guide—Custom

When On is selected, the rear control- panel display shows ISO-AUTO. ISO-Aappears in the viewfinder sidebar.

Custom Setting b2: ISO Step Value

This option determines whether adjustments to sensitivity (ISO equivalency) are made in incre- ments equivalent to 1 3 EV (1/3 step, the default option), ½ EV (1/2 step), or 1 EV (1 step). High- light b2 ISO step value in the second level of the CSM menu ( 171) and press the multi selector to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection.

CSM MENU

b2 ISO step value

1/3 step OK

1/2 step

1 step

Settings

Bank Select

If a shooting menu bank in which ISO has been set to or is chosen after On is selected for Custom Setting b1, sensitivity (ISO equivalency) will not be adjusted automatically. Sensitivity will also not be adjusted automatically if a Custom Settings bank in which On is selected for Custom Setting b1 is chosen after ISO has been set

to or.

CH Mode

When Custom Setting b1 (ISO auto) is on and sensitivity is altered from the value se- lected by the user, the maximum shooting speed in CH (continuous high-speed) mode is seven frames per second.

183