Olympus iS-3 DLX Correcting the Data, After setting the data, Press the Date Mode button again

Page 62

CORRECTING THE DATA

Press the DATE MODE button to select the mode to be corrected.

Choose the data to be

changed by pressing the DATA SET button. Change the data

with the DATE ADJUST button.

After setting the data,

press the DATE MODE button again.

Make sure The data to be corrected is blinking.

Make sure The print mark is displayed.

Note: For fine-tuning of the built-in clock to the beginning of a specified minute, press the DATE

ADJUST button when " : " is blinking.

62

Image 62
Contents Instructions Depress Blinking HalfwaySelftimer PreparationsPF button Macro button Remote control sensor front AF illuminatorPower ON/OFF switch Back cover release Tripod socket Shift buttonsExposure compensation/ Manual exposure Auto flash Auto-S flash Fill-in flashAttaching the Strap Load the batteries p Open the back cover p Basic Shooting ProceduresOutline of Operations Button fully to take a picture Close the back cover pDepress the shutter release Loadingthebatteries Lights Turn the power switch onCheckingthebatteries Points to Remember Hold the Camera CorrectlyMake sure To lock the focusTo release the shutter and take the picture Reset Operation Standard Shooting ModeRelease upward to open Loading the FilmSlide the back cover Back coverFilm loading indicator Film automatically advances to the first frame Turn the power switchClose the back cover Switch on Button to determine Composition Follow the procedure here to cover ordinary photographyTurn the power Taking PicturesMax. telephoto focal Length 180mm Max. wide-angle focal Length 35 mmRelease button halfway Lock on, and when the subject is too closeDepress the shutter Rewinding the film before End of the roll Camera automatically rewinds the film when youUnloading the Film Reach the end of a rollMake sure Autofocus frame Usingthe Focus LockFrame, use the focus lock Flip up the flash Flash ModesSlide the flash release to Press the flash button Release the flash button to engage the mode Should be used. Slide When the flash isFlipped up, the camera FlashPress the shutter release button Auto Flash RangeFlip up the flash, Select the Auto-S mode ButtonPre-flashes are not emitted in the Sports mode Release button Make sure the exposure Flip up the flash, Mode is set to PProgram Mode. Press the shutterIs displayed on SelftimerRemote control button Focus and exposure will be lockedUse a tripod, etc., to hold the camera steady Macro Photography Press the macro buttonPress the zoom buttons to determine Composition Exposure Modes Usingthe Exposure ModesThere are seven exposure modes four with preset settings How to Select the Exposure Mode Buttons or shift dialTo shoot fast-moving subjects Select the Sports mode to display on the LCD panelSports Select the Portrait Mode to display onPortrait ButtonTo take pictures with extended in-focus backgrounds Mode to display on Release buttonLandscape Select the LandscapeShooting Night Scenes Free of Subjects Mode to display on Button LCD panelNight Scene Select the Night SceneShutter release button Engage the Night Scene Mode. Flip up the flash. PressSmaller aperture APERTURE-PREFERRED Auto aLarger aperture Slower shutter speed 60-sec 500-secPanel Adjust the apertureManual Exposure M Display M on the LCDExposure level will Adjust the shutter Be displayed on SpeedTurn the shift dial to ViewfinderDistance Table belowZoom Macro Exposure Compensation While pressing the +There are two film-advance modes in addition to Usingthe Drive Modes DriveSelecting the Drive Mode Drive ModesWhile pressing the drive Release the drive buttonContinuous Shooting While the shutter releaseFirst exposure Double Exposure D.EXPButton fully to take Display D.EXP. onCannot be canceled after the first shot Power Focus Spot Metering PictureZoomexposure This exposure method is most effective whenFully to take the picture Buttons again While keeping the zoomButton depressed, press Press Display Press the selftimer/remoteControl button to engage On the subject Remote Control mode Use selftimer outside this range Transmission is blocked by the converterCap to prevent light from entering the viewfinder Use the provided viewfinderViewfinder Cap Press the button on the remote control BulbPress the button on the remote control again Printing the Date and Time Correcting the Data After setting the dataPress the Date Mode button again Make sure The data to be corrected is blinkingA reflective backing that are ideal for both wide FlashDistance between the xenon tube and tne Conditions Brightness between that of the subjectTurn the power switch Select 1/100-sec. or When shooting in the Shutter-Preferred Auto modeExposure mode to S Using the shift dial ON, set the camerasPress the shutter release button Follow-Synchro Advanced flash photography using the G40Multi Flash Built-in flashAt 35 mm More than 100 mm A zoom lens, the focal length is changed byBe selected Mm wide-angle Greater than at 35 mm, for genuine telephotoAngle of view and depth of field That the camera is able to bring into focus.Subjects with low contrast Subjects that do not contain Power focus to manually focus on SubjectAutofocus AF Vertical lines Light Use the focus lock by firstTwo subjects at different distances Set in advanceYour shot and releasing the shutter at just the right time Standard photography mode refer to p , ifFilm, and is controlled by a combination Sense of motionMost suitable exposure compensation for both When shooting night scenes you may sometimesShooting a subject with a night scene as its System is automatically Automatically when in the P Program modeOn programmed data to properly compensate for For the excessive brightness Proper exposure refers to the balance of lightWall, the exposure will be based on the average Film speed is indicated on the back of filmConverter can be used with the Aperture-Preferred Function, which can fill the frame with an areaThis is a close-up lens that lets you fill the frame Making it ideal for macro photography beginnersPanorama Photography Optional Accessories Optional Grip Strap BCare and Storage Battery Handling Troubleshooting SeeRewound film is still loaded Viewfinder lights Camera closer to the subjectContrast blue or black Remove the filmNot positioned on the subject SymptomCamera Subject was backlitQuestions and Answers How long will the batteries last?Specifications Frame, panorama marks, autofocusFt, Tele 1.2 ~ 7 m 3.9 ~ 23 ft with ISO Olympus OPTICALCO. Europa Gmbh

iS-3 DLX specifications

The Olympus iS-3 DLX is a compact and feature-rich film camera that stands out for its unique blend of advanced technology and user-friendly design. Launched in the mid-1990s, the iS-3 DLX was designed to cater to both amateur photographers and those seeking to venture into the world of photography with a reliable tool.

One of the standout features of the Olympus iS-3 DLX is its built-in zoom lens, which offers a focal range of 35mm to 105mm. This versatility allows photographers to capture a wide variety of scenes, whether it's wide landscapes, group shots, or intimate portraits. The lens also boasts a fast maximum aperture of f/3.5 at the wide end, enabling excellent low-light performance and the ability to achieve soft background blur, enhancing the overall depth of field in images.

The camera incorporates advanced autofocus technology, which ensures precise focusing on subjects in a variety of lighting conditions. The three-point autofocus system is complemented by an intelligent exposure control that adjusts the camera's settings for optimal image quality, making it easier for photographers to achieve stunning results without extensive manual adjustments.

In terms of usability, the iS-3 DLX features an intuitive interface with a range of automatic and manual modes. The camera's program mode simplifies the shooting process by automatically selecting the best aperture and shutter speed based on the lighting conditions. Additionally, the manual mode provides experienced photographers with complete control over their settings.

Another noteworthy aspect of the iS-3 DLX is its compact design, making it an excellent choice for travel and everyday photography. The camera also includes a built-in flash that can be activated automatically in low-light situations, ensuring that users can capture well-lit images without needing external accessories.

The iS-3 DLX is powered by a set of AA batteries, which makes it convenient for users to replace them on the go. The camera's durable construction ensures robustness, ideal for various shooting environments, further appealing to adventure-seeking photographers.

In conclusion, the Olympus iS-3 DLX combines modern photography technology with a user-friendly interface. Its versatile lens, advanced autofocus system, and compact design make it a noteworthy camera for anyone looking to enjoy the art of photography while having access to reliable performance. Whether capturing everyday moments or special occasions, the iS-3 DLX remains a valuable tool in the world of film photography.