DiViCam428.book Page 6 Friday, August 26, 2005 10:55 AM
Inserting an
SD Memory
Card
•Your camera’s 32MB internal memory is disabled when you insert an SD memory card.
•To avoid permanent damage, remove the memory card only when when your player is at the Main Menu or when your player is turned off .
•You can only access your memory card if your camera in unprotected.
•If your camera cannot detect the memory card, remove the memory card, clean it with a soft cloth.
Turning on your camera
•To conserve battery power, your camera turns the LCD off if no operation is made within two minutes. See “Configuring Your Camera” on page
Lift the Memory card slot cover up and insert an SD memory card as shown.
Do not force the memory card into the Memory card slot. If it does not fit properly, gently remove it and try again.
To remove the memory card, turn off your camera and then gently push the card. The card pops out.
Figure 2-6: Lifting the Memory card slot
1.Press the Power button. The Status LED lights up in red and the LCD is activated. The Status LED turns green.
Figure 2-7: Turning on your camera
About Your Camera