Kramer Electronics VP-790 manual Figures

Contents

1	Introduction	1
2	Setting the Basic System	2
2.1	Optical Alignment	3
3	Setting Blend Width	7
4	Warp Adjustment	10
4.1	Warp the Projection Image on to a Curved Screen	10

Figures

Figure 1: Basic Setup	2
Figure 2: Image Projection	3
Figure 3: Input Screen	4
Figure 4: Multiunit Screen	5
Figure 5: Two Overlapping Images on a Screen	6
Figure 6: Two Projected Images Displaying the Horizontal Bar Test Pattern	7
Figure 7: Left Hand Blend Width Correctly Adjusted	8
Figure 8: Blend Width Correctly Adjusted on both Scalers	9
Figure 9: The Cross Hatch (F) Warp Pattern	10
Figure 10: VP-790 Warp Generator Main Window	11
Figure 11: Auto Connect Window	12
Figure 12: Connect to Unit Window	12
Figure 13: A New 2x2 Grid	12
Figure 14: Setting a Grid Mesh of Nine Points	13
Figure 15: Setting the Warp	13
Figure 16: Adjusting the Linearity	14
Figure 17: Complete Linear Adjustment	15
Figure 18: Blend Curve Type – S-Curve	15

VP-790 Blending Images – Introduction i