LG Electronics LVC-C310NP, LVC-C300HM, LVC-C311HM, LVC-C301NP Regulatory Notices For U.S.A

Page 2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER(OR BACK) NO USER SERVICE-

ABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SER-

VICE PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the prod- uct’s enclosure that may be of suffi- cient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servic- ing) instructions in the literature accompanying the appliance.

This installation should be made by a qualified service person and should conform to all local codes.

2

Warning

To prevent fire or shock hazard,do not expose the unit to rain or moisture. To avoid electrical shock,do not open the cabinet. Refer servicing to quali- fied personnel only.

Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70.

Regulatory Notices For U.S.A

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference when the equipment is opearted in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accor- dance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this product in the end user.

Caution:Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces or shall be provided with brushings.

Warning

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Image 2
Contents Operating Instructions Regulatory Notices For U.S.A Contents FeaturesPower Supply Operating Controls and Their Functions Power In / Control External Key A/D Using TELE, WIDE, FOCUS+, FOCUS- button Menu DescriptionsCamera ID Camera IDFocus Mode SET Return to Main Menu This function is exit to main menu Zoom Speed Set This function is for selection of zoom speedInitial SET AWB SET WB Mode Set This function is for changing the WB modeAWB SET AWB SET AE SET AE Mode Set This function is for changing to AE modeAGC Adjust Set This function is available for AGC MAN mode AE SETFlickerless Set Brightness Adjustment SetBacklight Set Shutter Speed Set Special SET Sharpness Adjust SetColor Set This mode is for B/W mode Special SETReturn to Main Menu This function is exit to main menuMotion Detection SET Detection Mode SetMotion DET Function Set OSD SETOSD SET Sensitivity SET Sensitivity SET Option E. Sensitivity SETWDR SET WDR SETWDR SET Option On Screen Display FunctionDigital Zoom mode Specifications Image deviceFocal Length Page No MFL30580130