Kodak M22 manual Camera problems, Status Solution

7

Troubleshooting

Camera problems

Status	Solution
Camera does not	■ Make sure the battery is installed correctly (see page 1) and
turn on	charged (see page 2). Charge the Li-Ion battery whenever
	necessary.
Camera does not turn
off
Camera buttons and
controls do not
function
LCD is too dark.	■ Adjust the LCD Brightness setting (see page 37).
Pictures remaining	■ Continue taking pictures. The camera is operating normally.
number does not	(The camera estimates the number of pictures remaining after each
decrease after taking a	picture is taken, based on picture size and content.)
picture
Flash does not fire	■ Check the flash setting, and change as needed (see page 11).
	NOTE: The flash does not fire in all modes.
Memory card is almost	■ Transfer the pictures to the computer (see page 39).
or entirely full	■ Delete pictures from the card (see page 24) or insert a new card.
Battery life is short	■ Make sure the correct battery type is installed (see page 50).
	■ Wipe the battery’s contacts with a clean, dry cloth before
	inserting it in the camera.
	■ Insert a new/charged battery (see page 1). Charge the Li-Ion
	battery whenever necessary.
	■ Limit the time you review pictures/videos on the camera LCD.
	■ Purchase a spare battery at www.kodak.com/go/accessories.

www.kodak.com/go/support 42