Kodak M1073 manual Using burst, Using exposure compensation to adjust picture brightness

Doing more with your camera

Using burst

Use burst to take up to 4 pictures in rapid succession.

	1	In most Still modes, press the		button repeatedly
		until	appears on the LCD.
	2	Press the Shutter button halfway to focus and set
		exposure.
	3	Press the Shutter button completely down and
	until the Burst icon	hold it to take pictures.
Press		The camera stops taking pictures when you release the
appears in the LCD status area.
		Shutter button, when the pictures are taken, or when

there is no more storage space.

NOTE: During quickview, you can delete all pictures in the burst series. To delete selectively, do so in Review (see page 17). Burst is not available when shutter speeds are longer than 0.5 seconds.

Using exposure compensation to adjust picture brightness

Before you take a picture, you can adjust exposure compensation to make pictures darker or lighter. (Available only in some modes.)

■Press to decrease exposure compensation.

■Press to increase exposure compensation.

The exposure compensation level is shown on the LCD and the image gets darker or lighter.

Using the framing grid to compose a picture

The framing grid divides the LCD into thirds—vertically and horizontally. This is helpful if, for example, you want to balance a picture between water, earth, and sky.

To turn on/off the framing grid, press button repeatedly.

www.kodak.com/go/support 35