Kodak DX7590 manual Connecting the camera to the printer, Printing pictures

Transferring and printing pictures

Connecting the camera to the printer

1Turn off the camera and printer.

2Optional: If you have a Kodak 5-volt AC adapter (optional accessory), plug it into the camera and into an electrical outlet.

IMPORTANT: Do not use the AC adapter included with the Kodak EasyShare camera dock or printer dock to power your camera.

3Using the USB cable that came with your camera, connect the camera to the printer. (See your printer user’s guide for details.)

Printing pictures

1Turn on the printer. Turn the camera Mode dial to Auto.

The PictBridge logo is displayed, followed by the current picture and menu. (If no pictures are found, a message is displayed.) If the menu interface turns off, press any button to redisplay it.

2Move the Joystick to choose a printing option, then press the OK button.

Current Picture	Press	to choose a picture. Choose the number of copies.
Tagged Pictures	If your printer is capable, print pictures that you tagged for
	printing (see page 47) and choose a print size.
Index Print	Print thumbnails of all pictures. This requires one or more sheets
	of paper. If the printer is capable, choose a print size.
All Pictures	Print all pictures in internal memory, on a card, or in Favorites.
	Choose the number of copies.
Image Storage	Access internal memory, a card, or Favorites.

NOTE: During direct printing, pictures are not permanently transferred or saved to the computer or printer. To transfer pictures to your computer, see page 51. If you turned the Mode dial to Favorites, the current favorite picture is displayed.

Disconnecting the camera from the printer

1Turn off the camera and printer.

2Disconnect the USB cable from the camera and the printer.

www.kodak.com/go/support 53