Kodak C813, C713 Check the image storage location setting see, Picture or, Blue or black, Subject

Troubleshooting

If...	Try one or more of the following
In Review mode,	■ Check the image storage location setting (see page 25).
you do not see a
picture (or the
expected picture)
on the LCD screen.
In Review mode, a	■ Transfer the picture to the computer (see page 37).
blue or black	■ Take another picture. If problem continues, try internal memory and/or
screen is displayed
instead of a	another memory card.
picture.
Shutter button	■ Turn on the camera (see page 2).
does not work.	■ Transfer pictures to the computer (see page 37), delete pictures from
	the camera (see page 14), switch image storage locations (see
	page 25), or insert a card with available memory (see page 3).
Picture is too light.	■ Move so there is at least 2 ft (0.6 m) between the camera and the
	subject.

■Decrease Exposure Compensation (see page 28).

Picture is not clear. ■ Clean the lens (see page 51).

■Make sure your camera is not in Close-up mode.

■Move so there is at least 2 ft (0.6 m) between the camera and the subject.

■Place the camera on a flat, steady surface or use a tripod.

Picture is too dark. ■ Turn on the flash (see page 7).

	■ Move so there is no more than 11.8 ft (3.6 m) in wide angle and
	6.9 ft (2.1 m) in telephoto between the camera and the subject.
	■ Use Fill flash (see page 7) or change your position so light is not
	behind the subject.
	■ Increase Exposure Compensation (see page 28).
Camera does not	■ Purchase a certified SD/MMC card.
recognize	■ Insert a card into the slot, then push to seat (see page 3).
SD/MMC card.
42	www.kodak.com/go/support