Kodak 1099969, CD83 manual Computer/connectivity problems, Picture quality problems, StatusSolution

Getting help

StatusSolution

You cannot take a picture

■Turn the camera off, then on again.

■Depress the Shutter button all the way (see page 5).

■Insert new or charged batteries (see page 2).

■Memory is full. Transfer pictures to the computer (see page 36), delete pictures (see page 21), or insert another card.

	Memory card not	■ Card may be corrupted. Format the card in the camera (see
	recognized or camera	page 35).
	freezes with card	■ Use another memory card. Only SD or SDHC Cards are supported.
	Cannot find the	■ To view pictures on a card or in internal memory, see page 20.
	desired picture/video
Computer/connectivity problems
	Status	Solution

Computer does not communicate with the camera

■Make sure the batteries are charged and installed correctly (see page 2).

■Turn on the camera.

■Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is connected to the camera and the computer (see page 36).

■See KODAK Software Help at www.kodak.com/go/camerasw.

Picture quality problems

Status	Solution
Picture is not clear	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the framing marks turn green, press the Shutter
	button completely down to take the picture.
	■ Clean the lens (see page 46).
	■ Make sure the camera is not in Macro mode (see page 32) if you are
	more than 27.6 in. (70 cm) from your subject.
	■ Place the camera on a flat, steady surface or use a tripod (especially
	in high-zoom settings or in low light).

www.kodak.com/go/support 41