Kodak M893 IS manual LCD screen messages

Troubleshooting

If...	Try one or more of the following
Cannot transfer	■ Disconnect the USB cable. (If using camera dock or printer dock,
pictures.	disconnect cable and remove camera from dock). Close all open
(The Add New	applications. Re-install the software (see page 44).
	■ Disconnect the USB cable. Close all software applications. Re-install
Hardware Wizard
cannot locate	the software (see page 44).
drivers.)	■ Reboot the computer.
	■ Try another computer.
Slide show stops or	■ Adjust the camera Video Out setting NTSC or PAL (see page 34).
does not run on an	■ Make sure the external device settings are correct. (See the device’s
external video	user’s guide.)
device.
LCD screen messages

If...	Try one or more of the following
No images to	■ Change image storage location setting (see page 33).
display
Memory card	■ Insert a new card (see page 4) or format the card (see page 34).
requires	Caution: Formatting a card deletes all pictures and videos,
formatting
	including protected files.
Memory card
cannot be read
(Please format
memory card or
insert another
card)
Only one USB	■ Unplug the USB cable from the camera.
connection	■ Remove the camera from the dock.
allowed.
Disconnect cable
or rem. (remove)
camera from dock.
52	www.kodak.com/go/support