Kodak M590 Computer/connectivity problems, Direct printing Pictbridge enabled Printer problems

Troubleshooting

StatusSolution

You cannot take a picture

■Turn the camera off, then on again.

■Depress the Shutter button all the way (see page 6).

■Insert a new/charged battery (see page 1).

■Memory is full. Transfer pictures to the computer (see page 39), delete pictures (see page 23), or insert another card.

Memory card not recognized or camera freezes with card

■Card may be corrupted. Format the card in the camera (see page 38).

■Use another memory card. Only MICROSD or MICROSDHC Cards are supported.

	Cannot find the	■ To view pictures on a card or in internal memory, see page 22.
	desired picture/video
Computer/connectivity problems
	Status	Solution

Computer does not communicate with the camera

■Turn off the camera, then turn it back on.

■Make sure the battery is charged and installed correctly (see page 1).

■Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is connected to the camera and the computer (see page 39). Then turn on the camera.

■See KODAK Software Downloads at www.kodak.com/go/camerasw.

Direct printing (PICTBRIDGE enabled Printer) problems

Status	Solution
Cannot print	■ The camera must be in PTP (not mass storage) mode. Change the
	Computer Connection setting (in the Setup menu) to Other
	Application (see page 37).

44 www.kodak.com/go/support