Kodak M753 manual Mode, Settings White Balance, Exposure Metering, ISO Speed

Doing more with your camera

Press Menu		, and	Options
OK to access	settings
White Balance			Auto (default)—automatically corrects white balance. Ideal
Choose your lighting			for general picture taking.
condition.			Daylight—for pictures in natural lighting.
			Tungsten—corrects the orange cast of household light bulbs.
			Ideal for indoor pictures under tungsten or halogen lighting
			without flash.
			Fluorescent—corrects the green cast of fluorescent lighting.
			Ideal for indoor pictures under fluorescent lighting without
			flash.
			Open Shade—for pictures in shade in natural lighting.
Exposure Metering			Multi-Pattern(default)—evaluates lighting conditions
Evaluate light levels at specific			throughout the image to give an optimum picture exposure.
areas of a scene.			Ideal for general picture taking.
			Center-Weight—evaluates the lighting conditions of the
			subject centered in the lens. Ideal for backlit subjects.
			Spot—similar to Center-weighted, except the metering is
			concentrated on a smaller area of the subject centered in the
			viewfinder. If used with Selectable AF zones, the exposure spot
			follows the focus zone. Ideal when you need an exact exposure
			of a specific area in the picture.
ISO Speed			Choose a lower ISO setting in brightly lit scenes; use a higher
Control the camera’s			ISO for low-light scenes. Choose Auto (default), 80, 100, 200,
sensitivity to light.			400, 800, 1250.
			NOTE: ISO returns to Auto when the camera is set to Portrait or SCN
			mode.
			Unavailable in Video mode.

26 www.kodak.com/go/support