Kodak M420 manual Status Solution, Computer/connectivity problems

Troubleshooting

	Status	Solution
	Battery life is short	■ Make sure the correct battery type is installed (see page 55).
		■ Wipe the contacts with a clean, dry cloth before inserting a
		battery in the camera.
		■ Insert a new or charged battery (see page 1).
	You cannot take a	■ Turn the camera off, then on again.
	picture	■ Depress the Shutter button all the way (see page 5).
		■ Insert a new or charged battery (see page 1).
		■ Memory is full. Transfer pictures to the computer (see page 35),
		delete pictures (see page 16), or insert another card.
	Memory card not	■ Card may be corrupted. Format the card in the camera (see
	recognized or camera	page 34).
	freezes with card	■ Use another memory card. Only SD or SDHC Cards are supported.
	Cannot find the	■ To view pictures on a card or in internal memory, see page 15.
	desired picture/video
Computer/connectivity problems

Status	Solution
Pictures do not	■ See Help in EASYSHARE Software.
transfer to computer

Slide Show does not run on an external video device

■Adjust the camera Video Out setting to NTSC or PAL (see page 34).

■Make sure the external device settings are correct. (See the device’s user’s guide).

Computer does not communicate with the camera

■Make sure the battery is charged and installed correctly (see page 1).

■Turn on the camera.

■Make sure the USB cable model U-8 is connected to the camera and the computer (see page 36).

■Make sure EASYSHARE Software is installed (see page 35).

44 www.kodak.com/go/support