Kodak CD153 manual Direct printing Pictbridge enabled printer problems

	Troubleshooting
Direct printing (PICTBRIDGE enabled printer) problems
Status	Solution
Cannot print to a	■ In the Setup menu, change the Computer Connection setting to
PICTBRIDGE Printer	Other Application (see page 34).
Picture quality problems
Status	Solution
Picture is not clear	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the framing marks turn green, press the Shutter
	button completely down to take the picture.
	■ Clean the lens (see page 46).
	■ Make sure the camera is not in Macro mode if you are more than
	27.6 in. (70 cm) from your subject (see page 32).
	■ Place the camera on a flat, steady surface or use a tripod (especially
	in high-zoom settings or in low light).
	■ Use a larger picture size (see page 30).
	■ If you’re manually adjusting the ISO speed, realize that high ISO
	setting may cause grainy pictures (see page 31).
Picture is too dark	■ Reposition the camera for more available light.
	■ Use Fill flash (see page 8) in Program mode, Backlight in SCN mode,
	or change your position so light is not behind the subject.

■ Move so that the distance between you and the subject is within the effective flash range. (See Specifications, page 44.)

■ To automatically set exposure and focus, press the Shutter button halfway. When the framing marks turn green, press the Shutter button completely down to take the picture.

■ In Program mode, increase the Exposure Compensation (see page 31).

www.kodak.com/go/support 42