Kodak Z1085 IS manual Using the framing grid to compose a picture, Focus mode Description, Macro

Doing more with your camera

Exposure Compensation—adjust the exposure; good for controlling backlit or non-standard scenes. If the picture is too light, decrease the setting; if it’s too dark, increase the setting.

ISO speed—adjust the camera’s sensitivity to light. Higher ISO indicates greater sensitivity. ISO 6400 and 8000 are available only in 3.1 MP and lower picture size (see page 27).

NOTE: A higher ISO may produce unwanted grain or “noise” in a picture.

Focus mode—select a large or concentrated area of focus.

Focus mode Description

Normal AF Focus setting for general picture-taking.

	Sharpness and detail in pictures at close range. Use available light instead
	of flash, if possible. The camera automatically sets the focus distance
Macro	depending on the zoom position. The close-up distances are:
	Wide angle: 7.9–27.6 in. (0.2–0.7 m)
	Telephoto: 19.7–39.4 in. (0.5–1.0 m)
Infinity	Distant subjects. Auto-focus framing marks are unavailable.
Manual	Focus is at center position. When MF icon appears, press OK to display
	focus indicator. Press	to adjust the setting. A magnified image

appears on the screen when adjusting focus position.

Using the framing grid to compose a picture

The framing grid divides the LCD into thirds—vertically and horizontally. This is helpful if, for example, you want to balance a picture between water, earth, and sky. To turn on/off the framing grid, see page 31.

36 www.kodak.com/go/support