Kodak V1073 manual Using the 3X optical zoom, Using the framing marks to take pictures

Taking pictures/videos

Using the framing marks to take pictures

Framing marks indicate the camera focus area. In Smart Capture mode		(and in
some SCN modes), the camera attempts to focus on faces.
Framing marks	1 Press the Shutter button halfway.
	When the framing marks turn green, focus is
	accomplished.

2If the camera is not focusing on the desired subject (or if the framing marks disappear), release the Shutter button and recompose the scene.

3Press the Shutter button completely down to take the picture.

NOTE: Multiple framing marks may appear when faces are detected. Framing marks do not appear in Landscape or Video mode.

Using the 3X optical zoom

1Use the LCD to frame your subject.

2To zoom in, press Telephoto (T).

To zoom out, press Wide Angle (W).

3Take the picture or video.

NOTE: For focus distances, see Specifications starting on page 56.

Using digital zoom

Use digital zoom in any picture-taking mode to get up to 5X magnification beyond optical zoom. Press Telephoto (T) until the slider is at the top of the optical zoom range. Release Telephoto (T), then press it again.

NOTE: You may notice decreased image quality when using digital zoom. The slider pauses and turns red when the picture quality reaches the limit for an acceptable 4 x 6-in. (10 x 15 cm) print. You cannot use digital zoom in Smart Capture or video mode.

8 www.kodak.com/go/support