Kodak V1253 manual Picture quality problems, Status Solution

	Troubleshooting
Status	Solution
Computer does not	■ Make sure the battery is charged and installed correctly (see
communicate with	page 1).
the camera	■ Turn on the camera .
	■ Make sure the USB cable model U-8 is connected to the camera
	and the computer (see page 47). (If using an EasyShare dock,
	check all cable connections. Make sure the camera is seated on
	the dock.)
	■ Make sure EasyShare software is installed (see page 46).

Picture quality problems

Status	Solution
Picture is not clear	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the framing marks turn green, press the Shutter
	button completely down to take the picture.
	■ Clean the lens (see page 59).
	■ Make sure the camera is not in Macro mode if you are more than
	27.6 in. (70 cm) from your subject.
	■ Place the camera on a flat, steady surface or use a tripod (especially
	in high-zoom settings or in low light).
Picture is too dark	■ Reposition the camera for more available light.
	■ Use Fill flash (see page 9) or change your position so light is not
	behind the subject.
	■ Move so that the distance between you and the subject is within the
	effective flash range. (See camera specifications starting on
	page 57.)
	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the framing marks turn green, press the Shutter
	button completely down to take the picture.

www.kodak.com/go/support 53