Kodak Z730 manual Camera ready light status, 25, or use a different card

Troubleshooting

Camera ready light status

Status	Cause
Ready light glows	Shutter button is pressed halfway down. Focus and exposure are set.
steady green.
Ready light blinks	Picture is being processed and saved to the camera.
green.
	Pictures are being transferred to computer; camera is connected.
	Camera firmware upgrade is in process.
Ready light glows	Camera is in Favorites mode.
steady orange.
Ready light blinks	Flash is not charged. Wait. Resume picture taking when the light stops
orange.	blinking and turns off.
	Auto-exposure or auto-focus are not locked. Release the Shutter
	button and recompose the picture.
Ready light blinks red	Battery is low or exhausted. Recharge the battery (page 1).
and camera turns off.
Ready light glows	Camera’s internal memory or card is full.
steady red.	Transfer pictures to the computer (page 46), delete pictures from the
	camera (page 33), switch image storage locations (page 25), or insert
	a card with available memory (page 5).
	Camera processing memory is full. Wait. Resume picture taking when
	the light turns green.
	Card is read-only. Change image storage location to internal memory
	(page 25), or use a different card.
	Memory card speed is slow. Card cannot be used to take videos.
	Change storage location to internal memory (page 25). Use this card
	to take pictures only.

53 www.kodak.com/go/support