Kodak C623, C623, C653 manual Setting Options White Balance, ISO Speed, Exposure Metering

Doing more with your camera

Setting	Options
White Balance	Auto (default)—automatically corrects white balance.
Choose your lighting condition.	Ideal for general picture taking.
	Daylight—for pictures in natural lighting.
	Tungsten—corrects the orange cast of household light
	bulbs. Ideal for indoor pictures under tungsten or halogen
	lighting without flash.
	Fluorescent—corrects the green cast of fluorescent
	lighting. Ideal for indoor pictures under fluorescent lighting
	without flash.
	Open Shade—for pictures in shade in natural lighting.
ISO Speed	Choose a lower ISO setting in brightly lit scenes; use a
Control the camera’s sensitivity	higher ISO for low-light scenes. Choose Auto (default), 80,
to light.	100, 200, 400, 800, 1250.
	NOTE: ISO returns to Auto when the camera is set to Portrait, or
	SCN mode, or during Long Time Exposure.
	Unavailable in Video mode.
Exposure Metering	Multi-pattern(default)—evaluates lighting conditions
Evaluate light levels at specific	throughout the image to give an optimum picture exposure.
areas of a scene.	Ideal for general picture taking.
	Center-weighted—evaluates the lighting conditions of
	the subject centered in the viewfinder. Ideal for backlit
	subjects.
	Center-Spot—similar to Center-weighted, except the
	metering is concentrated on a smaller area of the subject
	centered in the viewfinder. If used with Selectable AF zones,
	the exposure spot follows the focus zone. Ideal when you
	need an exact exposure of a specific area in the picture.

34 www.kodak.com/go/support