Kodak C310, CD40 manual Troubleshooting

Troubleshooting

Problem	Cause	Solution
Picture is too light.	Subject was too close for	Move so there is at least 2.6 ft (0.8 m)
	flash.	between camera and subject.
	Too much light.	Decrease Exposure Compensation
		(page 23).
Picture is not clear.	Lens is dirty.	Clean the lens (page 56).
	Subject too close when	Move so there is at least 2.6 ft (0.8 m)
	taking picture.	between the camera and the subject.
	Subject or the camera	Place the camera on a flat, steady
	moved while the picture	surface or use a tripod.
	was taken.
Picture is too dark.	Flash is not on.	Turn on the flash (page 7).
	Subject is too far away	Move so there is no more than 7.9 ft
	for the flash to be	(2.4 m) between the camera and the
	effective.	subject.
	Subject is in front of a	Use Fill flash (page 22) or change your
	bright light (backlit).	position so light is not behind the
		subject.
	Not enough light.	Increase Exposure Compensation
		(page 23).
Camera does not	Card may not be	Purchase a certified SD/MMC card.
recognize SD/MMC	SD/MMC certified.
card.
	Card may be corrupt.	Reformat the card (page 27).
		Caution: Formatting a card deletes all
		pictures and videos, including
		protected files.
	Card is not properly	Insert a card into the slot, then push
	inserted in camera.	to seat (page 3).

38 www.kodak.com/go/support