Kodak 1385483, C1550 manual Picture quality problems

	Troubleshooting
Picture quality problems
Status	Solution
Picture is not clear	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the framing marks turn green, press the Shutter
	button completely down to take the picture.
	■ Clean the lens (see page 45).
	■ Make sure the camera is not in Macro mode if you are more than
	27.6 in. (70 cm) from your subject (see page 31).
	■ Place the camera on a flat, steady surface or use a tripod (especially
	in high-zoom settings or in low light).
	■ Use a larger picture size (see page 29).
	■ If you’re manually adjusting the ISO speed, realize that high ISO
	setting may cause grainy pictures (see page 30).
Picture is too dark	■ Reposition the camera for more available light.
	■ Use Fill flash (see page 8) in Program mode, Backlight in SCN mode,
	or change your position so light is not behind the subject.
	■ Move so that the distance between you and the subject is within the
	effective flash range. (See Specifications, page 43.)
	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the framing marks turn green, press the Shutter
	button completely down to take the picture.
	■ In Program mode, increase the Exposure Compensation (see
	page 30).
Picture is too light	■ Reposition the camera to reduce the amount of available light.
	■ Turn the flash off (see page 8).
	■ Move so that the distance between you and the subject is within the
	effective flash range. (See Specifications, page 43.)
	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the framing marks turn green, press the Shutter
	button completely down to take the picture.
	■ In Program mode, decrease the Exposure Compensation (see
	page 30).
www.kodak.com/go/support		41