Solution
■ Make sure the batteries are installed correctly (see page 1).
■ Make sure batteries are new. If batteries are rechargeable, make sure they are fully charged (see charger documentation).
■ Transfer all pictures to the computer (see page 31). ■ Take another picture.
■ Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each picture is taken, based on picture size and content.)
■ Check the flash setting, and change as needed (see page 7). NOTE: The flash does not fire in all modes.
■ Transfer the pictures to the computer (see page 31).
■ Delete pictures from the card (see page 16) or insert a new card.
■ Make sure the correct battery type is installed (see page 44). ■ Insert new/charged batteries (see page 1).
■ See Extending battery life, page 44.
www.kodak.com/go/support
Troubleshooting
Troubleshooting
Camera problems
Status
Camera does not turn on
Camera does not turn off
Camera buttons and controls do not function
In Review, a blue or black screen is displayed instead of a picture
Pictures remaining number does not decrease after taking a picture
Flash does not fire
Memory card is almost or entirely full
Battery life is short
36