Kodak 1020304 manual Using the Drive button, Using the self-timer, To get into the scene, Seconds

Taking pictures/videos

Using the Drive button

Press the Drive button repeatedly to scroll through self-timer and burst modes.

The current flash mode appears on the LCD or EVF.

Using the self-timer

Use the self-timer when you want to be included in a picture, or to ensure a steady Shutter button press. Place the camera on a tripod or flat surface.

1In any picture-taking mode, press the Drive button until the desired self-timer icon is displayed on the LCD.

10 seconds—10		A picture is taken after a 10-second delay (so you have time
to get into the scene).
2 seconds—		A picture is taken after a 2-second delay (for a steady, shutter
	2
release on a tripod).
2 shot—2xThe first picture is taken after a 10-second delay. A second picture

is taken 8 seconds later.

2Press the Shutter button halfway to focus and set exposure, then completely down to take the pictures.

The camera takes the picture(s) after the delay.

Use the same procedure to take a 2- or 10-second self-timer video, but press the Shutter button completely down.

www.kodak.com/go/support 15