Yamaha HTR-5640 Setting the unit to match your Speaker system, Setting speaker output levels

Page 25

Setting the unit to match your

speaker system

Follow the instructions below to set the amplifier output to match the size of your room and speakers. Press u / d to cycle through parameters 1 through 4, and j / i to alter the parameter setting.

Factory default settings are highlighted.

1ROOM

Settings: S, M, L

Select the size of the room you have installed your speakers in. Roughly speaking, the room sizes are defined as follows:

[U.S.A. and Canada models]

S:16ft. x 3ft., 200sq.ft. (4.8 x 4m, 20m2)

M:20ft. x 16ft., 300sq.ft. (6.3 x 5.0m, 30m2)

L:26ft. x 19ft., 450sq.ft. (7.9 x 5.8m, 45m2)

[Other models]

S:3.6m x 2.8m, 10m2

M:4.8m x 4.0m, 20m2

L:6.3m x 5.0m, 30m2

2SUBWOOFER

Settings: YES, NONE

Select YES if you have a subwoofer in your system, or NONE if you do not.

3SPEAKERS

Settings: 2, 3, 4, 5, 6 (spk)

Select the number of speakers you wish to use in your speaker configuration. This number does not include your subwoofer.

Setting

Display

Speaker

2spk

L

R

Main L/Main R

3spk

L C R

Main L/Center/Main R

4spk

L

R

Main L/Main R/Rear L/

 

RL

RR

Rear R

 

 

5spk

L C R

Main L/Center/Main R/

 

RL

RR

Rear L/Rear R

 

 

6spk

L C R

Main L/Center/Main R/

 

Rear L/Rear Center/Rear R

 

RL

RC RR

 

 

BASIC SYSTEM SETTINGS

4SET or CANCEL

Select SET to confirm the changes you made to the above three settings. The unit will output a test tone to the speakers (see 5). Alternatively, select CANCEL to exit this menu without altering any of the unit settings.

5Use the test tone to check the speaker levels.

When you select SET in 4, the display changes to “CHECK: TestTone”, and the unit outputs a test tone to each of the speakers in turn. When the test tone begins, the display changes to “CHECK OK: YES”.

If the volume of the test tone varies between speakers, press j / i to change the display to “NO”. The unit will automatically enter the “2 SP LEVEL” mode.

If the test tone is output at the same volume from all of the speakers, select “CHECK OK: YES”. The unit will exit from the SETUP menu.

Notes

•The unit cycles the test tone around each of the speakers in turn twice.

•The indicator of the speaker currently outputting the test tone flashes on the front panel display.

Setting speaker output levels

(SP LEVEL)

Use this menu to compare and adjust the test tone output from each speaker to the output from the left main (or left rear) speaker so that the volume level for all speakers is identical. Press u / d to select a speaker, then adjust the balance using j / i.

Note

•The unit outputs the test tone from the selected speaker and the left main (or left rear) speaker in turn. The indicator of the speaker currently outputting the test tone flashes on the front panel display.

1L-R

Adjusts the balance between the main left and right speakers.

2C

Adjusts the balance between the main left and center speakers.

3RL

Adjusts the balance between the main left and rear left speakers.

4RC

Adjusts the balance between the rear left and rear center speakers.

5RR

Adjusts the balance between the rear left and rear right speakers.

6SWFR

Adjust the balance between the main left speaker and the subwoofer.

PREPARATION

English

21

Page 24 Page 26
Image 25
Page 24 Page 26
Contents HTR-5650/HTR-5640 Important Safety Instructions FCC Information for US customers For Canadian Customers Serial NoContents About this manual FeaturesGetting Started Supplied accessoriesControl Front panel Controls and FunctionsSET Menu -/+ NextRemote control Handling the remote control Using the remote controlFront panel display Connections Connecting to digital jacksConnecting a video monitor Connecting video componentsConnecting a DVD player/digital TV/cable Connecting a recording componentTV/digital TV Cable TV DVD playerConnecting a CD player Connecting audio componentsConnecting a CD recorder or MD Recorder CD playerConnecting the AM loop antenna Connecting the antennasFrequency Step switch China and General models only Because the inter-station frequencyDVD/SACD player Connecting an external decoderSpeaker placement Connecting the speakersSpeakers Connections Impedance Selector switchRear Speakers terminals Main Speakers terminalsCenter Speaker terminals Rear Center Speaker terminalsTurning on the power Connecting the power supply CordsConnecting the AC power cord China and General models onlyUsing the basic menu Basic System SettingsSetup SP LevelSET YES CancelSetting speaker output levels Setting the unit to match your Speaker systemPlayback Front panel Remote controlTo select the main Speakers you want to use To select the audio source connected to the 6CH Input jacksWhen you have finished using this unit Night listening modeBGV background video function To mute the soundInput modes and indications Program l / h Selecting a sound field programPlaying Dolby Digital EX or DTS ES Material Selecting PRO LOGIC, PRO Logic II or Neo6Press q/DTS SUR Normal stereo reproduction Virtual Cinema DSPPress STEREO/EFFECT again to turn the sound effect back on Understanding sound fields Digital Sound Field Processing DSPHi-Fi DSP programs Recreating a sound fieldSound design of CINEMA-DSP CINEMA-DSPCINEMA-DSP Programs For audio-video sources No toStraight Decode For movie programsDolby Digital/DTS + DSP sound field effect Sound field effectsDolby Digital EX/DTS-ES + DSP sound field effect Dolby Pro Logic + DSP sound field effectAutomatic tuning TuningManual tuning Automatically presetting stations for FM Stations Presetting stationsSee page 32 for tuning instructions Manually presetting stationsTune in to a station Shows the displayed station has been stored as C3Exchanging preset stations Selecting a preset stationPress and hold PRESET/TUNING Edit for at least 3 seconds Press PRESET/TUNING Edit againSetting the sleep timer Sleep TimerCanceling the sleep timer To set the amount of timeRecording Special considerations when recording DTS materialSET Menu Adjusting the items on the set MenuSet menu list 1A Center center speaker mode Speaker mode settingsLRG SML1C Rear LR rear speaker mode 1B Main main speaker mode1D Rear CT rear center speaker mode 1E Bass bass out modeSetting by feet Setting by metersSpeaker distance Dynamic rangeInput 1 I/O Assign input Output assignment Sound 5 Center GEQ center Graphic equalizerMemory guard Initial input modeCONV. Video conversion HTR-5650 Zone B SP B speaker B setControl area Remote Control FeaturesControlling this unit Controlling other componentClearing setup manufacturer Codes Setting the manufacturer codeClearing setup manufacturer code for the component control Controlling other components Adjusting the volume during Playback Setting the Speaker LevelsUsing the test tone Sound Field Program Parameter Editing Changing parameter settingsDigital sound field parameter descriptions From main left and right speakers, initial setting isFor 6ch Stereo CT Width Center widthGeneral TroubleshootingOnly the speaker on Refer toOne side can be Heard No sound fromOther settings on Unit cannot be changed Unit does not Volume level cannotInto standby mode No sound from the rearTuner Remote controlGlossary Component video signal Video signalPCM Linear PCM Sampling frequency and number Quantized bitsSpecifications List of Manufacturer Codes Satellite Tuner Cable TVDBS VCRLD Player DVD PlayerCD Player MD Recorder CD RECORDER/CDTape Deck WA72770

HTR-5640 specifications

The Yamaha HTR-5640 is a versatile 5.1-channel home theater receiver that combines affordability with advanced features, making it a popular choice among audio enthusiasts and casual listeners alike. This receiver is designed to deliver high-fidelity sound and provides plenty of connectivity options, making it an ideal addition to any home entertainment system.

One of the standout features of the HTR-5640 is its powerful amplification, rated at 100 watts per channel. This ensures that audio playback is robust and clear, capable of filling larger rooms with rich sound. The receiver supports multiple surround sound formats, including Dolby Digital and DTS, allowing users to enjoy a cinematic experience at home, enhancing the enjoyment of movies and music.

The HTR-5640 boasts a wide range of input options, featuring multiple HDMI inputs, coaxial and optical digital inputs, as well as standard RCA connections. This versatility allows users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices without hassle. Furthermore, it supports component video and composite video inputs, making it compatible with older equipment as well.

Yamaha's proprietary YPAO (Yamaha Parametric room Acoustic Optimizer) technology is another key component of the HTR-5640. This system automatically calibrates the receiver to optimize sound performance based on the specific acoustics of the room, ensuring that audio playback is tailored to the listening environment. This feature is particularly useful for users who may not have extensive knowledge about audio setup.

Additionally, the HTR-5640 includes an AM/FM tuner, allowing users to enjoy their favorite radio stations. The built-in on-screen display makes navigation and setup user-friendly, with a remote control included for added convenience. The receiver also features multiple sound modes, which enhance audio playback depending on the content being viewed or listened to.

In summary, the Yamaha HTR-5640 offers an impressive array of features and technologies that cater to both casual users and audiophiles. Its combination of power, sound optimization technology, and extensive connectivity options makes it a reliable solution for anyone looking to enhance their home entertainment experience. Whether you're watching movies, playing video games, or listening to music, the HTR-5640 is engineered to deliver an immersive audio experience that stands the test of time.
Top Page Image Contents