Leica EZ4 HD manual Focusing

Page 26

Focusing

Focusing raises and lowers the stereomi- croscope using the focusing drive. The specimen is brought into sharp focus as soon as

it is in the focal point of the objective.

The focusing drive can be operated either left- or right-handed.

Focusing

1.Set the magnification changer to the lowest level (8).

2.Set the working distance to approx. 100 mm for coarse focusing.

3.Set the magnification changer to the second level (35).

4.Use the focusing drive once again for fine focus.

After you have adjusted the image sharp- ness at high magnification, it remains constant even if you switch magnification levels

(parfocal).

Focusing drive torque

Leica E Series

Manual

26

 

 

 

Image 26
Contents Leica ES2 Leica EZ4 Leica EZ4 HD Manual Lorem IpsumCongratulations Chapter Overview Table of Contents Contents Safety and Use Important information Safety NotesHazardous electrical voltage EC Declaration of ConformityInstructions for Use Intervention from the user MaintenanceAccessories Leica ES2 Overview Leica ES2 Built-in carrying device Transport, Placement and StorageSetting up the microscope Ent and safe transportIdeal Image Setting the eye distance Correct Interpupillary DistanceTips on use Using the LED illuminatorIluminating the specimen ϘϘ Use incident light for plastic, opaque objectsParfocal FocusingFocusing Magnification Display Ded by the eyepieces is already incorporated in the scaleAdjusting the Resistance of the Focus Drive Adjusting the resistanceLeica EZ4 and Leica EZ4 HD Overview Leica EZ4 Instrument variant Leica EZ4 HD Safe transport Correct Interpupillary Distance LED illumination Switching on the LED IlluminatorAutomatic shutoff Enabling the automatic shutoff Controlling the Automatic ShutoffDisabling the automatic shutoff Illumination types Press 1× Press 2×Focusing Leica EZ4 models with open tubes 25, 1.6, 2, 2.5, 3Adjusting the Resistance of the Focus Drive Eyepieces only for Leica EZ4 Changing Eyepieces Only for Leica EZ4, Open Version Changing eyepiecesEyecups can be replaced Eyepieces and Eyecups Only for Leica EZ4, Open VersionEyecups Risk of infectionDioptric Correction AdjustingDioptric Correction Only for Leica EZ4, Open Version Carry out steps 6 to 8 for each objective individuallyDioptric Correction Stage micrometers Graticules Only for Leica EZ4, Open VersionGraticules CrosshairsVariant 1 10× and 20× eyepieces Graticules PreparationCare instructions Variant 2 16× eyepiecesInserting the Graticules Photography Using the Leica EZ4 HD Leica EZ4 HD Overview of the instrument General Instructions General InstructionsLeica Application Suite EZ IntroductionReal Full HD display Standard delivery Need ariseHD mode and PC mode Optional remote controlDetecting the active mode Capturing Images without a Computer in HD ModeChanging between PC and HD mode Saving to SD cardCapturing an image Cables High-resolution Video Display without a Computer HD modeChanging the Resolution Eces PC Mode Use with a ComputerInstalling and Connecting Then stays steady greenAspect ratio PC Mode LimitationsRemote control PC Mode Additional Use of a Hdmi Device Connecting the Hdmi monitorNation is available Configuring the White BalanceConfiguring a New White Balance Restoring Factory Settings Factory settingsCamera Menu Optional Remote Control Remote control does not work if the camera is in PC modeViewing Images and Movies with the Optional Remote Control Opening and closing the camera menu Point the remote control towards the microscopeCalling up the Camera Menu Specimens and those stained over a wide area Color Automatic White BalanceEnabling automatic white balance Adjusting the white balance manually recommended Color Manual White BalanceManual exposure Automatic exposureMovie resolution of videos Live resolution of the live imageCaptured resolution of the captured image Quality of the image captureRotates the live image by Setup Camera Camera SettingsCamera from HD mode to PC mode or vice versa OverlayDefines how long the menu is displayed on the screen Setup User User-defined SettingsSET Illum -1 to 3 save illumination modes Select the language of the menuIllumination mode is taken over Changing the illumination modeSetting appears Predefined Illumination ScenariosCare and Transport Care and Transport TransportSpecifications Camera Module CameraEMC 61000-3-2 Mechanical and optical interfaces OtherElectronic interfaces ϘϘ USB 2.0, mini-USB plugDimensions Leica ES2 Leica ES2 Leica EZ4 HD Leica EZ4 HD Leica EZ4, 10× Eyepieces Leica EZ4, 10× Eyepieces Leica EZ4 without Eyepieces Leica EZ4, without Eyepieces