4.In the same manner, insert a roll of film in the upper compartment. At that time, check that the film leader paper is set as shown in the photo above. (The leader paper inside is facing outward on the pressure plate. Note that the film direction is wrong if the leader paper is facing inward.)
5.Pull out some of the leader paper. Insert the tip of the leader paper into the slot of the lower
Gently rotate the
*Correctly align the start marks with each other, making sure that the film feeds properly. When im- proper feeding occurs, the proper number of exposures may not be taken.
*Avoid exposing the film to di- rect sunlight when inserting or removing film.
19