Kodak DS1000 manual Finishing, Ordering Information, Physical Characteristics

KODAK PROFESSIONAL EI Photographic Satin Print Paper / 160 g

FINISHING

Lamination

Compatible with heat-assisted and pressure-sensitive laminate materials. Use of heat-activated laminates with Encad 700/GS and GS+ inks, Epson 9000 Dye and Mutoh 4100 Dye ink is not recommended.

It is important that your print be dry before laminating and that you laminate within 24 hours. For best results, use inkjet-specific laminate products and follow laminate, manufacturer's instructions as a starting point. Since lamination performance varies as a function of materials, technique and environmental conditions, it is important to run tests to determine the best methods for your setup. Cleanliness of prints and work area is critical to avoid defects in lamination.

For increased durability, choose a laminate with UV protection and encapsulate with a 1/4-1/2" (6.5-13 mm) seal around the print edges to prevent moisture and other airborne pollutants from reaching the image. Heavier weight papers may require a wider edge seal.

Mounting

Prints can be mounted (laminated or not) to a variety of materials, including poster board, foam board, Sintra, Lexan and more. Use inkjet-specific adhesive materials and follow the manufacturer's instructions.

ORDERING INFORMATION

KODAK PROFESSIONAL EI Photographic Satin Print Paper / 160 g

Roll			Roll Width / CAT No.
Length	24 in.	36 in.	42 in.	50 in.	54 in.	60 in.
	(71 cm)	(91.4 cm)	(106.7 cm)	(127 cm)	(137.2 cm)	(152.4 cm)
100 ft (30.5 m)	NA	128 5824	182 0703	877 3608	188 4188	115 7668
16.4 ft (5 m)	NA	179 3132	NA	NA	NA	NA
(sample)
NA = Not available

PHYSICAL CHARACTERISTICS

Physical Characteristics	Value	Test Method Reference
Caliper	7 mil (178 ∝ m)	ISO 534
Opacity	>90	Tappi T 524
CIE Whiteness	96	Tappi T 524
Weight	160 g/sm	ISO 536
Brightness	>92	Tappi T 524
60-degree Gloss	40	ISO 7668
L*(D65/10 uvi/BBW)	>95	Tappi T 524
Operating Conditions	59-86°F (15-30°C), 20-70% RH
	(non-condensing)
Recommended Storage Conditions	68° F (20° C), 50% RH

If you have questions or need assistance, visit Kodak’s website at www.kodak.com/go/lfinkjet or contact your local Kodak representative.

The contents of this publication are subject to change without notice.

KODAK PROFESSIONAL EI

Photographic Satin Print Paper / 160 g

KODAK Publication No. E-2473

Kodak, Kodak Professional, and Digital Science are trademarks.	Revised 5-00
	Printed in U.S.A.