3
Solving camera problems
Camera problems
Status | Solution |
|
Camera does not | ■ Make sure the battery is charged and installed correctly (see |
|
turn on | page 1). |
|
| ■ Turn the camera off, then on again. |
|
Camera does not turn |
| |
off |
|
|
|
|
|
Camera buttons and |
|
|
controls do not function |
|
|
|
|
|
Pictures remaining | ■ Continue taking pictures. The camera is operating normally. |
|
number does not | (The camera estimates the number of pictures remaining after each | |
decrease after taking a | picture is taken, based on picture size and content.) |
|
picture |
|
|
|
|
|
Flash does not fire | ■ Check the flash setting, and change as needed (see page 13). |
|
| NOTE: The flash does not fire in all modes. |
|
|
|
|
Memory card is almost | ■ Transfer the pictures to the computer (see page 6). |
|
or entirely full | ■ Delete pictures from the card or insert a new card. |
|
|
|
|
Battery life is short | ■ Make sure the correct battery type is installed (see page 1). |
|
| ■ Wipe the contacts with a clean, dry cloth before inserting a battery | |
| in the camera. |
|
| ■ Insert a new or charged battery (see page 1). |
|
|
|
|
www.kodak.com/go/v1253support | 21 | |