Downloading and Viewing Video
When the PenCam is connected to a PC, Windows XP and Vista will automatically recognize the device and install the correct drivers.
Navigate to the Removable Disk in My Computer to view, copy or delete files just like a portable hard drive or flash drive.
Playback video recordings on your PC with media players such as VLC, winDVD, powerDVD etc., capable of decoding H263 format AVI files.
IMPORTANT NOTE: If you are unable to view videos on your PC, install the codec pack software named klcodec417s.exe stored on the PenCam or down- load from www.swannsecurity.com
Setting the Date & Time
To set or change the Date & Time:
1.Connect the PenCam to your PC.
2.Create a new .txt file using Windows Notepad.
3.Type the date & time in the following format
4.Save the file as userconfig.txt and place in the root directory of the PenCam.
5.Remove the PenCam from the computer and turn on the PenCam. Videos will now be time stamped with the updated date & time.
Note: Current date and time settings may be lost if the PenCam is formatted or completely drained of battery power.
Deleting & Formatting the PenCam
If the PenCam is full or operates slowly, delete unwanted files from the PenCam when connected to your computer.
IMPORTANT NOTE: If you format the PenCam all data will be permanently lost including the codec pack and userconfig.txt file with the current date & time settings. To reset the date & time follow the instructions above. If you require the codec pack again, it is available at www.swannsecurity.com
PenCam Layout
Power /
Record LED
Hidden
Camera
Reset
Switch
Hidden USB Port
Twist to reveal
Rubberized Grip Twist to expose pen tip
Working Pen Tip
Top of PenCam
USB Connection
Bottom of PenCam
6 | 3 |