Swann SWADS450IPC manual SwannSmart App Settings, Connection

SwannSmart App Settings

General

Version: The version number of the mobile app you’re running. You might need to know this number if you’re in contact with Swann Technical Support - however, if you’ve got auto-updates enabled for your phone/tablet, you should be using the most recent one by default. (The “x”s will be numbers.)

About: The release notes and general information for the app. Basically, it’s stuff that we didn’t write here because we didn’t think of it or it hadn’t happened yet.

Sign In Automatically: When enabled, SwannSmart will automatically login to your account whenever the app is booted. When disabled, the app will ask for your username and password each time, although it will remember them: you’ll need to confirm signing in.

Username: The username you used when you registered with SwannSmart.

Password: The password you selected when you registered with SwannSmart.

Re-Sign In: Whether you want the SwannSmart app to automatically re-sign in when your connection times-out.

Disable Auto-Lock:When auto-lock is disabled, your phone won’t automatically lock after a period of inactivity. This can be useful if you’re watching images in real- time and don’t want the screen to turn off. However, it can be troublesome if you leave the app running and pocket the phone - you’ll probably wind up pocket dialing someone.

Sound Effects: You can turn the application’s sounds on and off here. This won’t affect the internal microphone in your camera, just the notification/warning sounds that the SwannSmart app makes.

Connection

Server: The server you’re using to access images from your cameras. This should be set to server.swannsmart.com. Do not change this unless instructed to by Swann technical support staff.

Connection: The type of connection that you want to use. By default - and unless you’re some kind of evil networking genius - this should be P2P.

17