Sigma DP1 user manual File Numbering Options, Setting the File Numbering System

FILE NUMBERING SYSTEM

Stored data is automatically assigned file numbers from 0001 to 9999. When data is being reviewed, the file number of each image is displayed in the right corner on the color LCD monitor (see P.70, 75). The file number is also incorporated into the filename of the image. The filename consists of “SDIM” followed by the 4-digit file number and extension. For example: image number 0023 will be stored in the file SDIM0023.X3F. All DP1 image files will be stored in the / ###SIGMA folder on the card.

File numbering can be continuous, or can be reset every time an empty card is detected. Use the Camera Set-up menu to set the file numbering system.

FILE NUMBERING OPTIONS

OPTION	DESCRIPTION
Continuous	Numbering is continuous. The first file number assigned on an
(Default)	empty card will be one higher than the last assigned number.
	(If the inserted card contains DP1 images with file numbers
	greater than the last assigned number, file numbering will
	continue with one higher than the highest file number on the
	card.)
Auto Reset	Each time an empty card is inserted, or all images on the
	current card are deleted, the file number will reset to its default
	value of 0001. (If the inserted card already contains DP1
	images, the file number will not be reset).

SETTING THE FILE NUMBERING SYSTEM

1

Remove the lens cap and turn the camera on.

2

Press the button.

3

To open the [Set Up] menu, press the button.

4

Use the buttons to select the [File Numbering] menu and press the button.

5

Use the buttons to select numbering system.

6

Press the button or the button to apply the setting or the button to close the sub-menu without making any changes.

105