High Performance Stereo Amplifier, Specifications

HIGH PERFORMANCE STEREO AMPLIFIER

This power amplifier has been designed to provide high Quality performance with a minimum of maintenance. However, it's performance will only be as good as the care and quality of components with which it is installed. We therefore advise that you read these instructions very carefully to familiarize yourself with the product and it's features.

Should you require assistance with the installation or wiring so this unit, please call our toll-free "HELP" line at 1-800-645-4994 during the days/hours shown.

HELP!

1-800-645-4994

Monday-Friday 8:30am - 7:00pm Eastern

Saturday

9:00am - 5:00pm Eastern

SPECIFICATIONS

Maximum Output Power:	120 Watts	Input Sensitivity:	Low-level 200 mV. - 2 V.
	30 watts RMS @ 4 Ohms		High-level 2V - 10 V.
Output Impedance:	4-8 Ohms	Supply Voltage:	12 volts, negative ground
Frequency Response:	20- 25,000Hz +/-1 dB	Fuse Rating:	5 amps.
Channel Separation:	60 dB	Dimensions (W X H X D):	8-5/8" X 2-1/8" X 3-15/16”
Signal / Noise Ratio:	90 dB		219 mm X 54.3 mm X 100 mm
Input Impedance:	Low-level 10K Ohms
	high-level 100 Ohms

* Due to continuing improvement, Audiovox reserves the right to change features and design without notice.

-1-