Audiovox AXT-500 owner manual Wiring Instructions, Power Connection, Ground Connection

Page 6

WIRING INSTRUCTIONS

The wiring of your amplifier will depend on the system and speakers you are using but will either be a stereo, mono, or mixed-mono application. The following pages illustrate the input and output wiring for these types. please refer to the appropriate diagrams for the system configuration you are using. The power and speakers wire connections for this amplifier are made via screw tightened terminal blocks. Loosen the screw for the connection to be made and fully insert the wire (strip 1/2" of insulation from the end) under the respective screw on the side panel (crimp-on "U" terminals are provided to simplify wiring and we recommend their use.). Tighten the screw down to secure the wire.

1. Power Connection

The battery terminal (BATT) must be connected directly to the positive terminal of the vehicle battery to provide an adequate voltage source and minimize noise. Connecting the battery terminal lead to any other point (such as the fuse block) will reduce the power output and may cause noise and distortion. Use only #10 gauge or thicker (smaller gauge #) wire for this lead and connect it to the terminal of the battery after all other wiring is completed.

2. Ground Connection

The ground terminal (GND) connection is also critical to the correct operation of the amplifier. Use a wire of the same gauge as the power connection (#10 or thicker) and connect it between the ground terminal (GND) of the amplifier and a metal part of the vehicle close to the mounting location. This wire should be as short as possible and any paint or rust at the grounding point should be scraped away to provide a clean metal surface to which the end of the ground wire can be screwed or bolted.

3. Remote Turn-On Connection

The amplifier is turned on by applying +12 volts to the remote turn-on terminal (REM). The wire lead to this terminal should be connected to the "Auto-Antenna" lead from the car stereo which will provide the +12 volts only when the car stereo is turned on. If the car stereo does not provide an Auto-Antenna lead, the remote turn-on lead may be wired to an "Accessory" or "Radio" terminal in the car's fuse block. This will turn the amplifier on and off with the ignition key, regardless of whether the car stereo is on or off. The remote turn-on lead does not carry large currents, so #20 gauge wire may be used for this application.

-6-

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Owners Manual Operation IndexSpecifications High Performance Stereo AmplifierPrecautions Installation Instructions Installation DiagramGround Connection Wiring InstructionsPower Connection Remote Turn-On ConnectionSpeaker Connections Input ConnectionsChannel and MIXED-MONO Input Wiring Diagram CAR StereoChannel and MIXED-MONO Output Wiring Diagram Right Rear SpeakerChannel Input Wiring Diagram Channel Output Wiring Diagram Right Front SpeakerChannel Mono Bridged Input Wiring Diagram Channel Mono Bridged Output Wiring Diagram Right Speaker SUB-WOOFEROperation Power Indicator LampsProtection Mode LED Level Gain ControlsHigh Level Input Connection LPF Crossover Frequency ControlCrossover Selector Fuse90 DAY/12MONTH Limited Warranty

AXT-500 specifications

The Audiovox AXT-500 is a robust and innovative device that stands out in the ever-evolving world of audio technology. Designed with user convenience and high fidelity in mind, the AXT-500 caters to consumers seeking an exceptional audio experience, making it perfect for both casual listeners and audiophiles alike.

One of the main features of the Audiovox AXT-500 is its impressive sound quality. The device is engineered with advanced audio processing technology, allowing it to deliver clear, crisp sound across a wide frequency range. This ensures that users can enjoy their favorite music, podcasts, or audio books with an immersive quality that enhances the overall listening experience.

In addition to superior audio quality, the AXT-500 is equipped with Bluetooth connectivity, enabling seamless wireless streaming from a multitude of devices. This feature not only enhances convenience but also eliminates clutter, allowing users to enjoy their audio content without the constraints of physical connections. The Bluetooth range is impressive, ensuring stable connections even at considerable distances.

The AXT-500 also boasts a long-lasting battery life, making it ideal for outdoor use or long listening sessions. With a single charge, users can enjoy hours of uninterrupted playback, which is particularly beneficial for those who are always on the go. The device includes an energy-efficient power management system that maximizes battery life without compromising audio performance.

Furthermore, the Audiovox AXT-500 integrates modern design elements that appeal to a wide audience. Its sleek, portable form factor makes it easy to take along, while durable build quality ensures it can withstand the rigors of everyday use. The device is available in various color options, allowing users to select one that best fits their personal style.

Additional features of the AXT-500 include intuitive controls, which facilitate easy navigation through different audio sources and settings. The device often comes with built-in voice assistant support, permitting users to operate it hands-free and access information or playlists effortlessly.

In summary, the Audiovox AXT-500 is a feature-rich audio device that combines outstanding sound quality, modern connectivity options, and user-friendly design. It stands out not only for its sleek aesthetics but also for its performance and functionality, making it an excellent choice for anyone seeking to elevate their audio experience. This device is a perfect illustration of how technology continues to innovate and enhance our daily lives through superior sound solutions.
Top Page Image Contents