Trouble Shooting

	PROBLEM	POSSIBLE CAUSE

	Northing appears on	☞Check the power cable, power supply output and video
	Northing appears on	connection between the camera and monitor.
	the screen.	connection between the camera and monitor.

		☞Are the camera lens or the lens glass dirty?
	The image on the	Clean the lens / glass with a soft clean cloth.
	The image on the	☞Adjust the monitor controls, as required.
	screen is dim.	☞If the camera is facing a very strong light, change
		the camera position.
		☞Adjust the lens focus.

	The image on the	☞Adjust the contrast control of the monitor.
	screen is dark.	☞If there is an intermediate device, correctly set the 75Ω/Hi-z.

	The camera is not	☞Check the camera is correctly connected to an appropriate
	working properly	☞Check the camera is correctly connected to an appropriate
	and the surface of	regulated power source.
	the camera is hot.
	Motion Detection	☞Has MOTION DET been set to ON in the menu?
	is not activated.	☞Has MD AREA been properly defined?

	The color of the	☞Check the settings in WHITE BALANCE menu.
	picture is not correct.	☞Check the settings in WHITE BALANCE menu.
	picture is not correct.

	The image on the	☞Make sure that the camera isn’t facing direct sunlight or
	screen flickers.	fluorescent lighting. If necessary,change the camera position.

	The SENS-UP does	☞Check that the AGC setting in the EXPOSURE menu is’t set to OFF.
	not work.	☞Check the EXPOSURE menu and make sure SHUTTER is set to------.

- 37 -

PROBLEM