Speco Technologies CILT00T6B user service Precautions Safety Instructions, Precautions for use

				CAUTION
				RISK OF ELECTRIC SHOCK
				DO NOT OPEN
			CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
			DO NOT REMOVE COVER(OR BACK).
			NO USER-SERVICEABLE PARTS INSIDE.
			REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
			ISO14001
		The lightning flash with an arrowhead symbol, within an equilateral
		triangle is intended to alert the user to the presence of uninsulated
		dangerous voltage within the product's enclosure that may be of
		sufficient magnitude to constitute a risk of electric shock to persons.
		The exclamation point within an equilateral triangle is intended to alert
		the user to the presence of important operating and maintenance
		(servicing) instructions in the literature accompanying the appliance.
		INFORMATION - This equipment has been tested and found to comply with
		limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
		These limits are designed to provide reasonable protection against harmful
		interference when the equipment is operated in a commercial environment.
		This equipment generates, uses, and can radiate radio frequency energy and, if
		not installed and used in accordance with the instruction manual, may cause
		harmful interference to radio communications.
		Operation of this equipment in a residential area is likely to cause harmful
		interference in which case the user will be required to correct the interference at
		their own expense.
		WARNING - Changes or modifications not expressly approved by the
		manufacturer could void the user’s authority to operate the equipment.
Intense Light Miniature Turret Camera		CAUTION : To prevent electric shock and risk of fire hazards:
		☞Do NOT use power sources other than those specified.
	CILT00T6B	This installation should be made by a qualified service person and
	CILT00T6W	should conform to all local codes.
	1 Speco Technologies		2 Speco Technologies

1. Precautions				2. Safety Instructions
				Precautions for use
	Do not install the camera in	Do not install the camera under	Do not touch the front lens of the
	extreme temperature conditions.	unstable lighting conditions.	camera.	• This camera should be installed by qualified personnel only
				• There are no user serviceable parts inside
				• Do not disassemble this camera other than to make initial adjustments
				• Use a UL approved regulated 12 volt DC power supply
				• Use appropriate low voltage power cable to prevent fire or electrical shock
				• Please insure that your installation area can support the weight of the camera
	Only use the camera under conditions	Severe lighting change or flicker can	This is one of the most important parts of
	where temperatures are between	cause the camera to work improperly.	the camera. Be careful not to leave
	-10°C and +50°C. Be especially careful to		fingerprints on the lens cover.
	provide ventilation when operating under			Please handle this camera carefully
	high temperatures.
				• Do not use a strong or abrasive detergent when cleaning the camera
	Never keep the camera pointed	Do not drop the camera or subject	Do not expose the camera to
	directly at strong light.	it to physical shocks.	radioactivity.	• Do not install near cooling or heating device

It can cause malfunctions to occur.	Severe lighting change or flicker can	If exposed to radioactivity the CCD
	cause the camera to work improperly.	will fail.

NOTE

*If the camera is exposed to spotlight or object reflecting strong light, smear or blooming may occur.

*please check that the power satisfies the normal specification before connecting the camera.

3 Speco Technologies

4 Speco Technologies