View information of the PhotoFrame
You can find the model name, the firmware version of the PhotoFrame, and the memory status of the PhotoFrame and other storage device available on the PhotoFrame.
1 In the home screen, select [Settings] and then press OK.
2 Select [Info].
»»The information of the PhotoFrame is displayed on the screen.
Reset all settings to factory default
1 In the home screen, select [Settings] and then press OK.
2 Select [Default Settings], and then press OK.
3 Select [Yes], and then press OK.
»»A confirmation message is displayed.
4 Select [Yes], and then press OK.
»»All settings on the PhotoFrame are set to factory default.
•To cancel the operation, select [No] in the prompt message and then press OK.
EN 27