Audiovox PAB-2150R manual Wiring Instructions, Power Connection, Ground Connection

Page 6

WIRING INSTRUCTIONS

The wiring of your amplifier will depend on the system and speakers you are using but will either be a stereo, mono, or mixed-mono application. The following pages illustrate the input and output wiring for both types. Please refer to the appropriate diagrams for the system configuration you are using.

The power and speaker wire connections for this amplifier are made via screw tightened terminal blocks. Loosen the screw for the connection to be made and fully insert the wire (strip 1/2" of insulation from the end) under the respective screw on the side panel (crimp-on "U" terminals are provided to simplify wiring and we recommend their use). Tighten the screw down to secure the wire.

1.Power Connection

The battery terminal (+12V) must be connected directly to the positive terminal of the vehicle battery to provide an adequate voltage source and minimize noise. Connecting the battery terminal lead to any other point (such as the fuse block) will reduce the power output and may cause noise and distortion. Use only #10 gauge or thicker (smaller gauge #) wire for this lead and connect it to the terminal of the battery after all other wiring is completed.

2.Ground Connection

The ground terminal (GND) connection is also critical to the correct operation of the amplifier. Use a wire of the same gauge as the power connection (#10 or thicker) and connect it between the ground terminal (GND) of the amplifier and a metal part of the vehicle close to the mounting location. This wire should be as short as possible and any paint or rust at the grounding point should be scraped away to provide a clean metal surface to which the end of the ground wire can be screwed or bolted.

3.Remote Turn-On Connection

The amplifier is turned on by applying +12 volts to the remote turn-on terminal (REM). The wire lead to this terminal should be connected to the "Auto-Antenna" lead from the car stereo which will provide the +12 volts only when the car stereo is turned on. If the car stereo does not provide an Auto-Antenna lead, the remote turn-on lead may be wired to

an "Accessory" or "Radio" terminal in the car's fuse block. This will turn the amplifier on and off with the ignition key, regardless of whether the car stereo is on or off. The remote turn-on lead does not carry large currents, so #20 gauge

wire may be used for this application.

-4-

 

Image 6
Contents Owners Manual Warranty IndexSpecifications High Performance Stereo AmplifierPrecautions Installation Instructions Installation DiagramGround Connection Wiring InstructionsPower Connection Remote Turn-On ConnectionSpeaker Connections Input ConnectionsStereo and MIXED-MONO Input Wiring Diagram 25 4 3Stereo and MIXED-MONO Output Wiring Diagram Mono Bridged Input Wiring Diagram 25 43Mono Bridged Output Wiring Diagram Power Indicator OperationLevel Gain Control Bass Boost Switch Filter SelectorCrossover Frequency Control Remote Subwoofer Level Control Input Fuse12 / 24 Month Limited Warranty Audiovox Corp., Hauppauge, N.Y 128-5720

PAB-2150R specifications

The Audiovox PAB-2150R is an advanced mobile multimedia receiver that brings a comprehensive set of features designed for modern audio needs. With its sleek design and user-friendly interface, this device caters to both avid audiophiles and casual listeners alike.

One of the standout features of the PAB-2150R is its robust connectivity options. It supports both Bluetooth and USB connectivity, allowing users to effortlessly stream music from their smartphones and other devices. Bluetooth functionality not only enables hands-free calling but also provides an easy way to access music applications. This makes it a perfect choice for those who spend a lot of time on the road and want to keep their hands free while driving.

The Audiovox PAB-2150R is also equipped with a built-in AM/FM tuner, providing access to a wide range of radio stations. The digital tuner ensures clear and reliable reception, while the ability to save presets makes it easy to access favorite stations without hassle. Additionally, the device supports MP3 and WMA file formats, allowing users to play their favorite digital music files directly from a USB flash drive.

Another notable characteristic of the PAB-2150R is its customizable sound settings. With built-in equalization options, users can tweak the audio output to better suit their personal preferences and acoustic environment. The unit features a high-quality amplifier, ensuring that music is delivered with clarity and depth, making even the most subtle notes come alive.

In terms of display, the Audiovox PAB-2150R boasts a bright and clear LCD screen that is easy to read, even in varying light conditions. This intuitive interface allows for easy navigation through the device’s various features and settings.

Furthermore, the PAB-2150R is designed with user convenience in mind. The unit includes multiple installation options, making it compatible with various vehicle models. Installation is straightforward, catering to both DIY enthusiasts and those seeking professional installation services.

In conclusion, the Audiovox PAB-2150R combines advanced technology, multiple connectivity options, and user-friendly features, making it a standout choice in the mobile audio market. Whether for casual listening or serious music enjoyment, this multimedia receiver is designed to enhance every journey.