Q-See QC40108 manual Part 7 Playing Back Files, Search

Next under Region click the Select button to set up the area of the camera display that you want to be sensitive to motion.

You will then see the camera’s view overlaid
with a grid. The green box is the current loca-
tion of the cursor. The red area is the sensi-
tive area and the clear area is not sensitive
to motion. Click the Fn button on the remote
control to adjust the sensitivity of your mouse
as you move the cursor. After you have finished
the setup click the Enter button on the remote
control to exit. Next set your sensitivity level
from 1 to 6 (6 being the most sensitive), then
click the Save button on the Detect screen to	PICTURE 6-7
save the setting.

PART 7 - PLAYING BACK FILES

SEARCH

To begin a search for an event:

STEP 1. Enter the date to be searched. You can also click on the clock icon to open the Calendar. Highlighted dates have recorded files.

PICTURE 7-2

The Search and Playback window	1		2
		1p		2p 3p	4p
can be accessed through the Shortcut		StartTime Type
		11:48:00 R
		11:37:22 M
menu. You can view the playback from		11:54:00 A
		13:00:00 R
		12:10:00 M
any camera that was activate during the		14:00:00 R
		16:00:00 R
		15:00:00 R
recording session.		17:00:00 R

									3
									Start Time
4	6								08-19-10 13:20:00
									End Time	15
									08-19-10 13:26:00
	5								13
									Size(KB) 52736
	08-19-2010	00: 00: 00	All	CH 1	2	3	4	ALL	14	16

			7		9		11				17		19		21
				8		10		12				18		20
									PICTURE 7-1
Number	Function	Number		Function					Number	Function
1	Playback	8		Reverse					15	Backup
	Window
2	File List	9		Fast Play					16	Search
3	File Information	10		Previous					17	Next Channel
				Frame
4	Playback	11		Next Frame					18	Next File
	Progress Bar
5	Stop	12		Volume					19	Video Clip
6	Slow Play	13		Previous File					20	Repeat Playback
7	Play	14		Previous					21	Full Screen
				Channel

The playback screen can be set to display the recordings from one camera or as many channels as you have.

STEP 2. Enter the start time (if known) or skip this field to search the entire day. Select the type of event; All, Alarm, Motion Detection (MD) or both Alarm and Motion Detection.

STEP 3. Select which channels you wish to view. Each of the four slots is a pull-down which allows you to select a specific channel. You can leave these empty to view 1-3 channels. You can also choose to view four channels at a time or all eight channels simultaneously.

STEP 4. Click on the Search icon and any records fitting your criteria will be listed in the column to the right of the screen. Up to 128 files can be displayed and multiple tabs (pages) may be displayed in the search results depending on the number of cameras you have as well as how you configured your playback display. In the event that a camera is set to manually record, the events will be broken up by hour.

All

Alarm

MD

Alarm/MD

All CH 1

PICTURE 7-3

13

14

15

16

CH 1 2 3 4

PICTURE 7-4

16:00:00 R 17:00:00 R

Start Time

08-19-10 15:00:00

End Time

08-19-10 15:59:00 Size(KB) 52736

PICTURE 7-5