SETTING UP REMOTE ACCESS FOR Q-SEE DVR SYSTEMS
MODEL NUMBER: QC40198
Section 2: Here are channel number and three function buttons: Start dialog, Local play, and Refresh.
Section 3: Here you have PTZ controls (Manual Chapter 7.2.2), Color (Manual Chapter 7.2.3) button and you can also select picture path and record path (Manual Chapter 7.2.4).
Section 4:
Section 5: Here you can view window switch buttons. You can also select video priority between fluency or
System monitor window switch supports full
Picture 18
Picture 19
For information on the features of, and how to use the remote viewing program refer to Chapter 7 Web Operation, 7.2 Login starting on page 77 of the Users Manual.
Notice: If you still have problems connecting remotely:
block the ActiveX control, if you still have a problem try closing them. Other
If you have a router plugged into another router, for example, if you have the DVR attached to a router which is attached to DSL or Cable router, you may need to forward port 80 (or whatever port you are using) and port 37777 on the DSL or Cable router to the IP address of the router that the DVR is attached to, so that router can then forward the ports to the DVR. Please refer to the PORT FORWARDING section above on how to get instructions on how to forward the port on the other router.