Q-See QT426-603 manual Part 3 Connecting the DVR to Your TV

Page 4

Q-SEE QUICK INSTALLATION GUIDE

MODEL NUMBER QT426-603 AND QT426-618

PART 3 - CONNECTING THE DVR TO YOUR TV

The primary display on the DVR is VGA. To use with a VGA monitor:

1.Plug the VGA cable (not included) to the VGA port on the DVR.

2.Connect the other end of the VGA cable to the monitor.

To use with a TV:

1.Plug the VGA cable (not included) to the VGA port on the DVR.

2.Connect the other end of the VGA cable (not included) to a VGA monitor.

3.Go to the login screen on the VGA monitor and log in to the DVR.

4.Attach a RCA cable from the DVR to the RCA video in port on the TV.

5.Hold down the ESC button on the DVR for 10 seconds to transfer the video feed from the VGA monitor to the TV.

6.You will now be able to view the cameras and access the menus on the TV but not the VGA monitor.

NOTE: You cannot view the cameras and control the menu on a TV and VGA monitor at the same time. Please note that you need to use a monitor that is 19” or larger.

3 P a g e

Image 4
Contents Quick Installation Guide See Quick Installation Guide Part 1 Package ContentsPart 2 DVR Camera and Power Connections Part 3 Connecting the DVR to Your TV Power Part 4 DVR Controls Front PanelPart 5 Accessing the DVR Menus Part 6 Setting UP the DVR to Record Manual Recording Motion Detection Recording Part 7 Setting UP the DVR to Playback Files See Quick Installation Guide Part 8 Setting UP the DVR to Backup Files Questions or Comments?