Q-See QSTC201, QSTC211 quick start Setting up the Wireless Function of the Camera

Q-SEE IP CAMERA MODEL QSTC201/211 QUICK INSTALLATION GUIDE

With New Firmware v 1.3.0 Build 20091022

(Figure 5)

(Figure 6)

2.Setting up the Wireless Function of the Camera

a.Go to: [START→ALL PROGRAMS→CONTROL CENTER→IPTOOL] on your Windows Start Bar. This will generate a dialog box listing all connected IP Cameras (see Figure 2). From here, right click on the camera you wish to set the wireless function for. Log on as directed in Figure 5 and you will see a video feed from your Q-See IP Camera as illustrated in Figure 6. Click the [Setup] button on the top of your toolbar (Number 11, Figure 6) and a configuration menu will appear on the left of your screen (see Figure 7). Choose the “Wireless Config” option from the menu and you will enter into a Wireless Setting dialog screen where you can adjust your settings (Figure 7).

b.Check the “Wireless Switch” box illustrated in Figure 7.

c . Click the “Refresh” button in your Menu Box (as indicated in Figure 7) and your system will now detect the wireless router connected to your computer.

3 P a g e