Q-See QSTC211, QSTC201 user manual UserParameter Name, Notification configuration

QSTC201/211 IP-CAMERA USER MANUAL

Please refer to the following table for parameters and instructions of user configuration.

UserParameterName	User name to operate theMeaninglogon client end
User Type	Type of user: normal user, advanced user and super
	administrator
Binding MAC	The MAC addresses of users accessing the server
address	which should setup according to actual MAC address of
	the server.
Password	Password to log into the client terminal
	Password to log into the client terminal
Confirm Password	Note: The confirmed password which is input by user
	should conform to new password the user set.

5.7Notification configuration

Enter into notification – mail configuration refer to Figure 5-22

1.From Email: sender’s e-mail address

2.User name and password: sender’s user name and password

3.Server address: SMTP name of sender

4.Select “This server requires a secure connection (SSL)”; user can setup mail servers (such as Gmail) according to actual needs,

5.Receival email address list: add email address into the list

6.Receival email address: receiver’s e-mail address

7.after all parameters are setup, user can click “Test your account settings”, if email is sent successfully, a “Test Successful” window will pop up, if not, users can try other email addresses or check the settings.

Notice: If user changes the static IP into PPPoE, there will be an e-mail sent to users’ mail box for notification of a new IP address.

44