Q-See QT426-818 manual Part 6 Setting UP the DVR to Record

Page 7

Q-SEE QUICK INSTALLATION GUIDE

MODEL NUMBER QT426-818

PART 6 - SETTING UP THE DVR TO RECORD

There are 4 modes for recording: manual, schedule, motion detection, and external sensor. In this Quick Start Guide we will cover manual, schedule, and motion detection. If you want to use external sensor alarms refer to sections

4.4.3through 4.5.1 of the user’s manual for information on how to set these up. To setup any type of recording you need to select Record in the Setup menu (RED square in Pic 6.1) which will bring up the RECORD screen (Pic 6.2). Here you can enable recording on the channels you want to record by putting checkmarks in the boxes of the cameras that you want to record.

Pic 6.1

Pic 6.2

Selecting the Record Bitrate tab will open the window in Pic 6.3 where you can select the resolution, frame rate, and quality setting for each camera.

Pic 6.3

6 P a g e

Image 7
Contents Quick Installation Guide Part 1 Package Contents See Quick Installation GuidePart 2 DVR Camera and Power Connections Part 3 Connecting the DVR to Your TV Part 4 DVR Controls Front Panel PowerPart 5 Accessing the DVR Menus Part 6 Setting UP the DVR to Record Manual Recording Motion Detection Recording Part 7 Setting UP the DVR to Playback Files See Quick Installation Guide Part 8 Setting UP the DVR to Backup Files Questions or Comments?