Q-See QR414-405 manual Part 4 Accessing the DVR Menus, Part 6 to Start Recording

Page 5

Q-SEE QUICK INSTALLATION GUIDE

MODEL NUMBER QR414-405

PART 4 - ACCESSING THE DVR MENUS

Choose MENU by right clicking on the mouse or by pushing the

MENU button on the DVR front panel or remote control.

The Main Menu offers the following Setup Features:

CAMERA: Setup name display, position, image view, and record quality of each channel (cameras).

RECORD: Enable recording & audio, set resolution & quality, recording mode and file size.

NETWORK: Setup Network access (Remote Internet Monitoring).

SEARCH: Find files for playback and backup.

DEVICES: Manage & Format hard drive and USB devices, setup alarms, PTZ cameras, mobile phone access and motion detection. SYSTEM: Setup time, date, password, and video mode.

PART 5 - SETTING UP CAMERAS FOR VIEWING AND RECORDING

From the Main menu, select CAMERA. Here you can setup the name display (up to 8 characters) and position of each channel (cameras). Select COLOR SETUP to adjust the image brightness, saturation, contrast and hue settings for each channel (camera). You can also choose whether each channel can be previewed in LIVE MODE and/or RECORDING MODE.

PART 6 - TO START RECORDING

This System offers 3 modes for recording:

1. Manual 2. Time Schedule 3. Motion Detection. From the main menu, select RECORD to enter into the Record Setup menu (shown at right).

CHANNEL: “ON” enables video to record from the respective camera. If the channel is set to “OFF”, video from that channel will not record.

RESOLUTION: D1=704x480, HD1=704x240, CIF=352x240

QUALITY: Best, Good, Normal

Using higher resolution and quality settings results in better video quality, but takes up more space on the hard drive. Choosing lower settings result in lower video quality, but takes up less space on the hard drive.

AUDIO: If audio is ENABLED sound will be recorded with the video from the channels, and will have audio output in playback mode. If audio is DISABLED, sound will not record, and there will be no audio output in playback mode (Audio cameras or a microphone is required to record the sound).

REC MODE: Sets DVR to record on Manual, Motion Detection & Time Schedule Recording (instructions below).

4 P a g e

Image 5
Contents Quick Installation Guide Part 1 Package Contents See Quick Installation GuidePart 2 DVR Camera and Power Connections Part 3 DVR Controls Front Panel Power IndicatorPart 6 to Start Recording Part 4 Accessing the DVR MenusPart 5 Setting UP Cameras for Viewing and Recording Manual Recording Grid ExplanationTime Schedule Recording Motion Detection RecordingSearch Playback Part 7 Setting UP the DVR to PlaybackFile List Part 8 Backing UP the Video on the DVRQuestions or Comments?