Using the Controls Front Panel | AudioSource PROJECTONE specification

INPUT

LINE IN

CD IN

BRIDGING

	LEFT
1	ON

	(MONO)
RIGHT	2

SPKR A

OFF

(STEREO)

SPKR B

RIGHT

	(+)	BRIDGING	(–)
				USE
				F
+	-	-	+	FUSE 4A
	-	-	+	LEFT
				LEFT

MODEL AMP ONE

Using the Controls (Front Panel)

Power

This front panel button switches the AMP One on or off. A multicolored LED indicates its power status.

Speaker Selector

The AMP One has two pairs of speaker outputs. Press button A to activate the A outputs. Press button B to activate the B outputs. Both A and B outputs may be used simultaneously, provided the combined impedance does not fall below 2 ohms.

Note: Before pressing either of the speaker selector buttons, be sure the AMP One's level controls are set at the minimum position.

Phones

You can connect headphones to the AMP One using a standard 1⁄4 " stereo phone jack. To deactivate the speakers while you listen through headphones, simply turn off the A and B speaker selector buttons.

Meter X0.1

This switch increases the sensitivity of the meters by a factor of ten, which is useful for monitoring the AMP One's output at low volume. In other words, the meters will display ten times the actual power output when this feature is active. A red LED in this switch indicates activation.

Peak Limiter

The peak limiter modulates high frequencies at high volume, protecting your speakers from damage or distortion. A red LED also indicates activation of this feature.

Power Meters

These meters indicate the output level of your AMP One. When the AMP One is powered up, the meters will be softly lit, indicating standby mode. Once the unit's power supply is stabilized, its meters will brighten completely.

Input Level Controls

These knobs adjust the incoming signal level and thereby act as volume controls. We recommend that these be set to max and your signal source (receiver, CD player, preamplifier, etc.) be used to adjust the volume.

Hooking up the Wires (Back Panel)

Audio signals travel out of one component and into another. All of your connections should also go from out to in.

Input Jacks 1

Connect the line out jacks from your signal source (receiver, CD player, preamplifier, etc.) to the input jacks on the AMP One.

Note: "Line In" and "CD In" jacks cannot be used simultaneously.

Bridging Switch (refer to wiring diagram) 2

In addition to providing 80 watts RMS per channel in the stereo mode, your AMP One can be used as a high power mono amplifier, providing over 200 watts RMS. This can be accomplished by sliding the bridging switch from the stereo position to the mono position. For mono applications, use only the right channel input. Similarly, use only the right channel input level control.

Note: Be sure to observe the correct speaker connections for bridged applications. Because of the high power output in this mode, we recommend initially setting the right level control at "min", and then adjusting the volume to the desired level.

Speaker Terminals 3

More than one pair of speakers can be used with the AMP One. We have provided two pairs of speaker outputs, labeled Spkr A (left & right), and Spkr B (left & right). The speaker terminals are color coded. Red posts indicate posi- tive (+) terminals and black posts indicate negative (–) terminals. Be sure to connect the positive output terminals of your AMP One to the positive input terminals of your speakers and the negative output terminals of your AMP One to the negative input terminals of your speakers.

Note: Refer to the wiring diagrams on the next page for proper connection of speaker cables.

PROJECTONE specifications

AudioSource PROJECTONE is an innovative audio solution designed to cater to the demands of both casual listeners and audiophiles. This versatile audio system blends advanced technologies with user-friendly features, making it a standout option in the competitive audio market.

One of the key features of PROJECTONE is its superior sound quality. Utilizing cutting-edge digital signal processing (DSP), this system ensures that audio playback is crisp, clear, and free from distortion. With an impressive frequency response, PROJECTONE can reproduce a wide range of audio, from the deep lows of a bass-heavy track to the delicate highs of orchestral music, ensuring an immersive listening experience.

The design of PROJECTONE is another highlight. Its sleek and modern aesthetic makes it a visually appealing addition to any space. Available in various finishes, it can seamlessly integrate with existing décor. The system is compact yet powerful, enabling it to fit into smaller environments without compromising sound performance.

Connectivity is a top priority for the PROJECTONE. It supports multiple input options, including Bluetooth, Wi-Fi, and traditional wired connections. This flexibility allows users to stream music directly from their devices, access online music services, or connect to home theater systems with ease. The inclusion of hi-res audio support ensures superior playback of high-definition audio files, appealing to those who seek the finest sonic quality.

Additionally, PROJECTONE features smart technologies that enhance user experience. It can be controlled via a dedicated mobile app, allowing users to customize settings, manage playlists, and even access voice assistant features. This level of interactivity ensures that listeners can enjoy their music exactly how they want it, whether at home or on the go.

For users who appreciate versatility, PROJECTONE can function as a standalone speaker or as part of a larger multi-room audio system. This capability enables synchronized playback throughout the home, creating a cohesive audio atmosphere for any occasion.

In summary, AudioSource PROJECTONE combines exceptional sound quality, sleek design, versatile connectivity options, and smart technology integration, making it a fantastic choice for anyone looking to elevate their audio experience. Whether for casual listening or serious audiophile enjoyment, PROJECTONE stands out as a premier audio solution.