Main menu

USB port on your computer.

3.The computer system detects “New hardware” and starts to install the driver automatically. Wait for the system to finish the installation. When it has finished, several “Removable Disk”, which indicate all drivers of the digital photo frame, will be created in “My computer”.

4.Drag and drop the files on your computer to the memory device connected to the digital photo frame or to the built-in memory.

5.To disconnect the USB cable from the computer, double click the Safely Remove Hardware icon on the task bar. Click the USB Mass Storage Device, and then click OK.

Note:

yMake sure no USB storage device is connected with the Digital Photo Frame before connecting to your computer.

yThe Digital Photo Frame must be plugged in and turned on before connecting to the computer.

yWhen connecting with a computer, the USB HOST driver is not available.

yDo not disconnect the USB cable or remove the card during files coping and transferring.

ySystem support: Windows® 2000/ XP/ VistaTM.

yWhen a memory device is inserted into the Digital Photo Frame, the corresponding icon appears on the main menu.

yIn the main menu, you can select connected source to view photos, listen to music, watch videos, display the calendar

and clock, manage files or change frame settings.

1.Press the EXIT key on the remote as necessary to access the main menu. All connected source, photo, music, video, calendar, files and setup icons are displayed.

ViewSonic		VFM842/VFM1042
	11